開口式機架由機架底座和上橫梁組成。

開口式機架是型鋼車間常見的一種機架形式。這種機架的優點是制造簡單，裝卸、換輥方便。其缺點是強度和剛度較低，軋輥輥跳值較大，影響產品精度，故只適用于大型軋機。

The open frame is of the frame base and the upper cross beam.  

The open frame is one of the most common forms in the steel workshop. The advantages of this frame are simple manufacturing, loading and unloading, and convenient for roll change. Its disadvantage is that its strength and stiffness are low, the roll roll value is larger and the precision of the product is affected, so it is only suitable for large rolling mill.

軋機的輥系在換輥前可以預安裝并調整好，軋機停車后只需較短時間即可換上新輥系。而新輥系經少量試軋后即能軋出合格產品。因此這種軋機可調性能好，成材率高。

短應力線軋機可制成二輥式、三輥式或四輥式多種形式的軋機。在型鋼、線材和板帶鋼生產中部有應用。

The roll system of rolling mill can be pre installed and adjusted before changing the roll. After the rolling mill , it only needs a short time to replace the new roll system. The new roll system can be rolled out of the qualified product after a small amount of test rolling. Therefore, this kind of rolling mill has good adjustable performance and high yield.  

The short stress line mill can be made into two - roll, three - roll, or four - roll type rolling mills. It is applied in the middle part of steel, wire and strip steel.

五輥軋機，軋機專業廠家介紹，這種軋機也可以進行更為細致的分類，其中一種可以可以用于軋制比較難變形的金屬和合金帶材，另外一種常用于軋制厚度公差很小的不銹鋼、碳鋼和有色金屬帶材。

Five-high mill, mill professional manufacturers, this kind of mill can also be more detailed classification, one can be used for rolling more difficult to deform metal and alloy strips, another is often used for rolling thin tolerance of stainless steel, carbon steel and non-ferrous metal strips.