增設強壓功能。即對卸料鑲塊壓料部加厚尺寸(正常的卸料鑲塊厚H 0.03mm)，以增加對凹模側材料的壓力，從而抑制沖切時沖壓件產生翻料、扭曲變形。

Additional pressure function. In order to increase the pressure on the material of the die side, the pressure of the material in the die side is increased by the thickness of the material of the unloaded insert (normal unloaded insert thickness H 0.03mm), so as to suppress the turning and distortion of the stamping parts.

手鋸鋸削的注意事項

鋸條的松緊要合適，且鋸割時壓力不能太大，以防折斷傷人；

當鋸縫歪斜時，不可急于糾正，而需要慢慢地逐步糾正。

Notice of hand saw cutting

The tightness of the saw blade should be suitable, and the pressure should not be too large during sawing, so as to prevent breaking and hurting people.

When the SAW seam is skewed, it can not be corrected in a hurry, but it needs to be corrected gradually.