彎曲度：工字鋼高度小于或等于400MM時，每米彎曲度不得大于1.5MM，總彎曲度不得大于總長度的0.15%。高度大于400MM時，每米彎曲度不得大于1.0MM，總彎曲度不得大于總長度的0.1%。

Bending degree: when the height of the I-steel is less than or equal to 400MM, the bending degree of each meter must not be more than 1.5MM, and the total bending degree should not be more than 0.15% of the total length. When the height is greater than 400MM, the bending degree of each meter must not be more than 1.0MM, and the total bending degree should not be more than 0.1% of the total length.

不同于普通工字型的是H型鋼的翼緣進行了加寬，且內、外表面通常是平行的，這樣可便于用高強度螺栓和其他構件連接。其尺寸構成合理系列，型號齊全，便于設計選用。（除了吊車梁用工字型鋼）。

Unlike the ordinary I-type, the flange of H steel is widened, and the inner and outer surfaces are usually parallel, so that it can be easily connected with high-strength bolts and other components. Its size is a reasonable series, and the model is complete, which is convenient for the design. (except for crane girder with I-type steel)

細木工板握螺釘力好，強度高，具有質堅、吸聲、絕熱等特點，而且含水率不高，在10%—13%之間，加工簡便，用途為廣泛。

The woodworking board has good grip strength, high strength, strong quality, sound absorption, insulation and other characteristics, and water content is not , between 10% - 13%, easy processing, the most widely used.