軋輥在軋機中的使用效果不但取決于軋輥材質及其冶金質量，還和使用條件、軋輥設計、操作維護有關。不同類型軋機的軋輥使用條件有很大差異，造成差異的因素有：軋機條件。如軋機類型、軋機和軋輥設計、孔型設計、水冷條件和軸承種類等。

The use effect of roll in the rolling mill not only depends on the material and metallurgical quality of the roll, but also is related to the conditi of use, the design of the roll and the operation and maintenance. The use conditi of the rolls for different types of rolling mills are very different. The factors that cause the difference are the rolling mill conditi. Such as rolling mill type, rolling mill and roll design, pass design, water cooling condition and bearing type and so on.

修正精度高，涂層厚度從幾微米到幾毫米，可對金屬工件呈現磨損、劃傷、、裂紋、破損變形、硬度降低、損害等缺點進行堆積、封孔、補對等修正功用，只須打磨、拋光，也可進行車、銑、 刨、磨等各類機械加工，以及電鍍等后期加工。

The thickness of the coating is high, and the thickness of the coating is from several microns to a few millimeters. It can be worn, scratched, pinholes, cracks, breakage and deformation, hardness reduction, damage and other shortcomings to accumulate, seal, and compensate for the defects, such as grinding, polishing, milling, milling, grinding and other kinds of mechanical processing, as well as electroplating later processing.

由于軋制過程是連續的過程，因此操作人員需要不斷檢測軋輥狀況，使生產出來的產品滿足用戶對更嚴格的公差和表面質量的要求。

As the rolling process is a continuous process, the operator needs to continuously detect the roll status to meet the more stringent tolerance and surface quality requirements of the products produced.

生產長材產品的軋機種類繁多，因此，軋機類型的選擇、布局，軋輥材質的選擇、軋輥尺寸的確定，選擇范圍也非常廣。同時，不同的軋機所選擇的軋輥也是不相同的，需要根據生產要求選擇軋輥。

There are a wide variety of rolling mills to produce long timber products. Therefore, the selection and layout of the type of rolling mill, the selection of the material of the roll and the determination of the size of the roll are also very wide. At the same time, the rolls chosen by  rolling mills are also the roller should be selected according to the production requirements.