在帶鋼熱連軋機上使用著許多輥道，它們被分成若干段，每一段輥道或者以獨立的或者以與軋輥同步的速度和方向運送軋件。

為使軋件能夠在輥道中心運行，采用鼓形輥，并且交替地使左右兩邊的水平面稍微傾斜，或者使輥?zhàn)拥妮S線與軋件運行方向的交角交替地比直角稍微偏斜一些。

Many roller tables are used on hot strip mills. They are divided into several segments, each section of rollers or parts transported independently or at the same speed and direction with the rollers.

In order to make the workpiece can be run in the center of the drum shaped roller, roller, and alternately on both sides of the horizontal plane or slightly tilted, the roller axis and the running direction of the rolling angle alternately than some slightly skewed angle.

出坯輥道是切割區輥道之后至冷床之前的輥道，由若干輥?zhàn)咏M成，快速將切割后的定火鑄坯輸送至橫移區輥道。

緊接著出坯輥道的是橫移區輥道，該區輥道接受出坯輥道來的鑄坯，將鑄坯輸送至固定擋板之前，由橫移機構將每流鑄坯輸送到冷床或其他區域。

The billet is before and after cutting roller roller roller and cooling bed,  of a plurality of rollers, the rapid fire set after cutting billet conveying roller to traverse.

Then a blank roller is traversing roller, the roller roller to accept a billet, billet before delivery to the fixed baffle, by traversing mechanism each flow casting billet transporting to the bed or other areas.

皮帶輸送機的常規設計方法所存在的問題帶式輸送機常規設計方法實際上是一種安全或是偏于保守的設計方法。例如。選用的輸送帶安全系數、運行阻力系數偏大，從而造成選用的電動機功率過大，帶寬過寬或是抗拉強度要求較高。

The conventional design method of belt conveyor is a safe or cervative design method. For example. The safety factor and the running resistance coefficient of the selected conveyor belt are too large, resulting in excessive power selection, wide bandwidth or high tensile strength.