根據我國石油工業在新世紀的發展規劃要求，積極推動石油工業加熱爐標準化工作向著市場化、國際化的方向發展，開展加熱爐企業標準的研究。在站場用加熱爐設計、使用和管理經驗的基礎上，結合加熱爐的特點，從統一技術要求、優化設計.

According to the requirements of China's petroleum industry development planning in the new century, we should actively promote the standardization of heating industry in the petroleum industry and develop  the market and internationalization. On the basis of the design, use and management experience of the reheating furnace in the station, combined with the characteristics of the reheating furnace, the technical requirements and the optimum design are made from the unified technical requirements.

爐子壽命長。由于高溫作用、機械磨損和腐蝕等因素的綜合作用，爐子不可避免會有損壞，必須定期對爐子進行檢修，應盡可能延長爐之的使用壽命，降低費用。

勞動條件好。要求爐子的機械化及自動化程度高，操作條件好，安全衛生，對環境無污染。

The furnace has a long life. Due to the combined action of high temperature, mechanical wear and corrosion, the furnace will inevitably be damaged. It is necessary to overhaul the furnace regularly, so as to prolong the service life of the furnace and reduce the cost of repair.  

The working conditi are good. It is required that the mechanization and automation of the furnace are high, the operating conditi are good, and the environment is safe and sanitary, and the environment is not polluted.

加熱爐能快速加熱，氧化和脫碳少，適用于加熱圓形料坯和鋼管。與行星軋機相配合，可用來加熱連鑄板坯；也可對某些鋼材進行局部加熱。缺點是單位爐長的生產能力低，爐子熱效率較低。

The heating furnace can be heated quickly, with less oxidation and decarburization, and is suitable for heating round billets and steel pipes. It can be used for heating continuous casting slab and heating some steel products. The drawback is that the production capacity of unit furnace length is low and furnace thermal efficiency is low.