軋制變形制度：即一定軋制條件下從坯料到成品的總變形量和軋制的總道次，各機組的總變形量各道次的變形量，軋制方式等。InChina'ssteelrollingmachineequipmentindustry,automationandcomputersystemsaremainly。對于型鋼，軋件在孔型中軋制，并且在每個孔型中軋制一道，因此，型鋼的變形制度是以孔型的形式表示的，孔型的設計確定后變形制度就確定了。

Rolling system: that under certain rolling condition the total deformation from the blank to the finished product and the total rolling pass, deformation of the total deformation of each unit of each pass, rolling etc.. For the section steel, the rolled piece is rolled in the pass and rolled in one pass. Therefore, the deformation system of the section steel is expressed in the form of pass, and the deformation system is determined after the pass design is determined.

橫軋有兩種類型：一類是軋輥孔型沿軸向是不變的，沿徑向呈周期變化。軋件主要靠徑向變形實現成型。另一類是鍥橫軋工藝，即在兩個或者三個互相平行布置的軋輥或兩個平板的表面上.

There are two types of cross rolling: one is the roll pass is unchanged along the axis, and the other is radial variation. The workpiece is mainly formed by radial deformation. The other is the cross rolling process, that is, on the surface of two or three parallel rolls or two plates.

以一些小型冷軋機來說，由于它們大可配置75KW的電機，因此設備的軋制速度大也就達到3米每秒。而一些大型高延性盤螺冷軋機生產線來說的話，其電機的功率本身就很大.

For some small cold rolling mills, because they can be configured with the largest 75KW motor, the rolling speed of the equipment is as high as 3 meters per second. For some large high ductile cold rolling mill production lines, the power of the motor itself is very large.