減速機是國民經濟諸多領域的機械傳動裝置，行業涉及的產品類別包括了各類齒輪減速機、行星齒輪減速機及蝸桿減速機，也包括了各種專用傳動裝置，如增速裝置、調速裝置、以及包括柔性傳動裝置在內的各類復合傳動裝置等。

The reducer is a mechanical drive device in many fields of national economy, industry related product categories include all kinds of gear reducer, planetary gear reducer and the worm reducer, also includes a variety of special transmission device, such as accelerating device, device, and a flexible transmission device, transmission device, including various types of composite.

在安裝時，嚴禁用鐵錘等擊打，防止軸向力或徑向力過大損壞軸承或齒輪。一定要將安裝螺栓旋緊之后再旋緊緊力螺栓。

At the time of installation, it is strictly prohibited to use a hammer, such as a hammer, so as to prevent the axial or radial force from damaging the bearing or gear. It is necessary to tighten the bolt when the bolt is tightened.

減速機內部齒輪寬度 在減速機傳動空間允許時，增加齒輪寬度，可以減少恒定扭矩下的單位負荷。降低輪齒撓曲，減少噪聲激勵，從而降低傳動噪聲。

The width of the internal gear of the reducer can be increased when the transmission space of the reducer is allowed, so that the unit load under ctant torque can be reduced. Reduce gear deflection, reduce noise excitation, thereby reducing transmission noise.

減速機內部齒輪齒形修整（修緣和修根）和齒頂?shù)菇?將齒頂?shù)凝X形切削成比正確的漸開曲線略呈凸形。當齒輪齒面受外力產生變形時，可以避免對與之嚙合的齒輪產生干涉，并且可以降低噪音，延長齒輪壽命。

The internal gear of the reducer is trimmed (trim and trim) and tooth top chamfering to make the tooth shape of the tooth top  convex than the correct involute curve. When the gear tooth surface is deformed by external force, it can avoid interference to the gears engaged with it, and can reduce noise and prolong the service life of gears.