修正精度高，涂層厚度從幾微米到幾毫米，可對金屬工件呈現磨損、劃傷、、裂紋、破損變形、硬度降低、損害等缺點進行堆積、封孔、補對等修正功用，只須打磨、拋光，也可進行車、銑、 刨、磨等各類機械加工，以及電鍍等后期加工。

The thickness of the coating is high, and the thickness of the coating is from several microns to a few millimeters. It can be worn, scratched, pinholes, cracks, breakage and deformation, hardness reduction, damage and other shortcomings to accumulate, seal, and compensate for the defects, such as grinding, polishing, milling, milling, grinding and other kinds of mechanical processing, as well as electroplating later processing.

軋輥是軋機的核心部件，軋輥的使用涉及軋機使用時的類型選擇、軋輥的準備、在軋制過程中的維修和周期性修整，而這些都全是影響軋機生產率、產品質量和生產經濟性的因素。

Roll is the core part of the rolling mill. The use of the roll involves the type selection of the rolling mill, the preparation of the roll, the maintenance and the periodic dressing during the rolling process, all of which are all factors that affect the productivity of the rolling mill, the quality of the product and the production economy.

整體軋輥是相對于復合軋輥而言的，整體軋輥的輥身外層與心部以及輥頸采用單一材質鑄造或鍛造而成，輥身外層和輥頸不同的組織、性能通過鑄造或鍛造工藝以及熱處理工藝過程來控制和調整。

The whole roll is compared to the  roll. The outer layer of the whole roll is made of a single material or forging with a single material. The structure and performance of the roll are  and adjusted by the casting or forging process and the heat treatment process.

在粗軋機架后，中型型材軋機有兩組連續的機架。連續軋機，根據孔型設計既可以水平布置，也可以立式布置。對于有平行緣的型鋼和槽鋼，還配有機架。

After the roughing mill, there are two sets of continuous rack in the medium section mill. The continuous rolling mill can be arranged horizontally or vertically according to the pass design. For steel and channel steel with parallel edges, universal frame is also available.