中間輥道位于拉矯機和切割設備之間，用于支承和輸送鑄坯和輸送引錠桿。拉坯時，中間輥道與拉速同步，送引錠桿時可以用較高的速度。切割區輥道為切割區四周的輥道，該輥道中有幾個輥子需要升降或擺動，以防止切割時切壞輥子和切割渣粘結輥面。

The middle roller is located between the pull straightening machine and the cutting equipment, which is used to support and transport billets and to transport ingot bars. The middle roller, and casting speed synchronization, you can use a higher speed to send dummy bar.

The roller section of the cutting area is the roller table around the cutting area, and there are several rollers that need to rise or swing in the roller way, so as to prevent the roller and the cutting slag from sticking to the roller surface when cutting.

包膠滾筒的壽命是比較長的，像這種要求就是要壽命長的，因為包在滾筒上邊也不是很方便取下來呀，所以這就又驗證一點.

The life of the rubber drum is long, and the requirement is long life, because it is not very convenient to take the package on the top of the drum, so this will verify the first point again.

皮帶輸送機生產廠家在進行設計帶式輸送機時，優先采用長距離、大運量輸送機。皮帶輸送機從經濟上節省占地等方面進行考慮一般不設置輸送線并行的輸送方式在特別重要的環節當中也有采用并行兩條輸送，其中一條備用，用都是采用多條輸送機進行串聯。

Belt conveyor manufacturers in the design of belt conveyor, the priority is to use long distance, large capacity conveyor. Belt conveyor from the economy to save an area of land and other aspects of the belt conveyer in general does not set the transmission line parallel transport mode in the particular important link also has two parallel transmission, one of the spare, use a multi conveyor in series.

滾筒輸送線是自動化輸送設備中非常重要的產品，是工業企業生產中用來進行水平方向輸送生產物料，垂直方向輸送生產物料和傾斜方向輸送生產物料。

The roller conveyer line is a very important product in the automatic conveying equipment. It is used in the production of industrial enterprises to carry the production material in the horizontal direction, conveying the production material in the vertical direction and conveying the production material in the inclined direction.