楔橫軋技術是一種低耗的先進生產工藝在連桿生產線上采用楔橫軋制坯熱模鍛壓力機成形工藝生產連桿鍛件具有其它鍛造工藝無法相比的獨特優勢與輥鍛工藝相比材料利用率提高10%以上勞動生產率提高30 50%

Cross wedge rolling technology is an advanced production process with high precision, high efficiency, high efficiency and low cumption. On the connecting rod production line, the forming process of the die forging press of the wedge rolling blank is adopted to produce the connecting rod forgings with the unique advantages of other forging processes. Compared with the roll forging process, the utilization ratio of materials is raised by more than 10% of the labor productivity by 3050%.

軋制時毛坯的位置固定，因此不需設置側向支撐毛坯的導向尺?？傊?，它適用于軋制復雜外形結構，精度要求高，零件品種變換很多的情況。但其行程大小受到限制，所以，變形程度也受到影響，同時，板式軋機有空行程，故影響到生產率和變形程度都不能很大。

The of the blank is fixed during rolling, so there is no need to set the guide bar of the side supporting blank. In short, it is suitable for rolling complex shape structure with high accuracy and many varieties of parts. But the stroke size is limited, so the degree of deformation is also affected. At the same time, the plate mill has an empty travel, so the productivity and deformation can not be very large.

在經過改進之后，目前的軋機設備采用的是被動一軋一拖式生產方式，可以實現兩道軋制成型，不僅解決了速度配合問題，而且改變了傳統的四道軋制方式，生產效率明顯提高。

After the improvement, the current  mill equipment adopts a passive one rolling and towing mode of production, which can realize two rolling forming. It not only solves the problem of speed matching, but also changes the traditional four way rolling method, and the production efficiency is  improved.

軋機專業廠家說，熱軋機的優點主要可以歸納為三個方面。一點，采用熱軋可以明顯的減少能耗，降低成本。此外，熱軋時可以發揮出較高的金屬塑性，而且所產生的變形抗力較小，能夠有效的防止金屬出現嚴重的變形問題。

The mill manufacturer explains that the advantages of the hot rolling mill can be summed up in three aspects. First, the use of hot rolling can significantly reduce energy cumption and reduce costs. In addition, hot rolling can give full play to the high metal plasticity, and the deformation resistance is small, which can effectively prevent the serious deformation of the metal.