五金沖壓件與鑄件、鍛件相比，具有薄、勻、輕、強的特點。沖壓可制出其他方法難于制造的帶有加強筋、肋、起伏或翻邊的工件，以提高其剛性。秦皇島五金沖壓件由于采用精密模具，工件精度可達微米級，且重復精度高、規格一致，可以沖壓出孔窩、凸臺等。冷沖壓件一般不再經切削加工，或僅需要少量的切削加工。熱沖壓件精度和表面狀態低于冷沖壓件，但仍優于鑄件、鍛件，切削加工量少。

槽鋼的鋸削：槽鋼的鋸削與扁鋼一樣，但是要分二次從寬邊面往下鋸，不能在一個面上往下鋸，應盡量做到在長的鋸縫口上起鋸，因此工件必須多次改變夾持的位置。

Channel steel sawing: the channel sawing of the channel steel is the same as that of the flat steel, but it must be sawed down two times from the wide side, and can not be sawed down on one surface, and should be sawed on the long saw mouth as far as  so the  of the clamping must be changed many times.

五金沖壓模具的安裝是否正確合理，不僅影響五金沖壓件的產品質量和精度，還會影響模具的工作壽命及生產安全。并且熟練掌握沖壓模具的安裝也是每個沖壓工應該掌握的技巧。

Whether the installation of the metal stamping die is correct and reasonable, not only affects the quality and precision of the metal stamping parts, but also affects the working life and production safety of the die. And skilled in stamping die installation is also a skill that every stamping worker should master.